• footer_bg-(8)

Anwụ nkedo erimeri

  • Sleeve for Die Casting Machine

    Aka uwe maka igwe nkedo anwụ anwụ

    Aka aka bụ akụkụ bụ isi nke ọnọdụ ịgba ntụtụ nke igwe oyi akwa anwụ. Ọ bụ akụkụ a na-arụ ọrụ nke ejiri ọla pụrụ iche mee. Ọ chọrọ izute ihe achọrọ nke oke okpomọkụ, nrụgide dị elu na mmepụta ike dị elu. Ọ nwere ihe dị elu chọrọ maka ihe nrụpụta ya ma chọọ ọgwụgwọ okpomọkụ.

    Usoro mmepụta chọrọ mmanu iji gboo ihe ndị a chọrọ ma mee ka ndụ ya dịkwuo ogologo. Ọ bụ ihe oriri na ọ dị mkpa ka dochie ya ozugbo enwere ike imebi ya, ka ọ ghara imetụta àgwà na arụmọrụ nke mmepụta.

  • Heater for zinc alloy die casting machine

    Igwe ihe eji eme ihe nkedo zinc alloy die

    E wezụga ikpo ọkụ ọkọlọtọ, anyị nwekwara ike ịnye ikpo ọkụ pụrụ iche dịka ihe ị chọrọ.

  • Goose Neck for zinc alloy die casting machine

    Ọgazị olu maka igwe ihe nkedo zinc alloy die

    Standard ojiji maka 10T/25T/30T/40T/50T/90T/130T/160T/200T/280T/400T

    Omenala ojiji maka 28T/38T/60T/88T/100T

    E wezụga ọkọlọtọ ọgazị olu, anyị nwekwara ike na-enye pụrụ iche ọgazị olu dị ka gị chọrọ.

  • Cast Iron Plunger head/ Cast Iron Plunger tip

    Isi ihe nkedo Iron Plunger/ Ntụnye Iron Plunger

    Anyị nwere ihe karịrị 20 afọ nke nnyocha na ngwa na mmepụta nke plunger n'ọnụ, site na-agbakwụnye ọdịnaya nke ally ọcha na ductile ígwè. na imezi ihe owuwu aain iji mee ka ọ bụrụ mgbagha lattice kristal na dislocation mgbe ọgwụgwọ pụrụ iche gasịrị. Ya mere, a na-emeziwanye nguzogide okpomọkụ dị elu na nguzogide eyi n'etiti ọla. Ka ọ dị ugbu a, ụlọ ọrụ anyị na-emepụta nkà mmụta sayensị na ezigbo nodular cast iron plunger tip nke ndụ ọrụ ya ruru ugboro 5000.

  • Combined Plunger Head

    Isi Plunger jikọtara ọnụ

    Isi Plungern Standard

    Dayameta: 40mm / 50mm / 60mm / 70mm / 80mm / 90mm / 100mm / 110mm / 120mm / 130mm / 140mm / 150mm / 160mm / 170mm / 180mm / 190mm / 200m m

    Onye isi Plunger omenala

    Dayameta: 45mm / 55mm / 65mm / 75mm / 85mm / 95mm / 105mm / 115mm / 125mm / 135mm / 145mm / 155mm / 165mm / 175mm / 185mm / 195mm / 205mm

    E wezụga ọkọlọtọ, anyị nwekwara ike ịnye ndị pụrụ iche plunger isi dị ka gị chọrọ.

  • Nano Plunger Head

    Onye isi Nano Plunger

    Ụgwọ nke ụlọ ọrụ Standard Plunger Hea

    Dayameta: 40mm/50mm/60mm/70mm/80mm/90mm/100mm/110mm/120mm/130mm/140mm/150mm/160mm/170mm/180mm/190mm/200mm

    Onye isi Plunger omenala

    Dayameta: 45mm/55mm/65mm/75mm/85mm/95mm/105mm/115mm/125mm/135mm/145mm/155mm/165mm/175mm/185mm/195mm/205mm

    E wezụga ọkọlọtọ, anyị nwekwara ike ịnye ndị pụrụ iche plunger isi dị ka gị chọrọ.

  • Nickel Plunger Head

    Nickel Plunger Isi

    Standard Plunger Isi

    Dayameta: 40mm/50mm/60mm/70mm/80mm/90mm/100mm/110mm/120mm/130mm/140mm/150mm/160mm/170mm/180mm/190mm/200mm

    Onye isi Plunger omenala

    Dayameta: 45mm/55mm/65mm/75mm/85mm/95mm/105mm/115mm/125mm/135mm/145mm/155mm/165mm/175mm/185mm/195mm/205mm

    E wezụga ọkọlọtọ, anyị nwekwara ike ịnye ndị pụrụ iche plunger isi dị ka gị chọrọ.

  • Thermocouple

    Thermocouple

    1. High thermal conductive, oge nzaghachi ngwa ngwa, njikwa okpomọkụ ziri ezi.

    2. Ọxịdashọn dị mma, mbuze na nguzogide ujo.

    3. Ezigbo iguzogide nrụgide n'ibu.

    4. Ọ dịghị mmetọ ka ígwè gbazee.

    5. Ogologo ndụ ogologo oge, enwere ike itinye ya ngwa ngwa.

  • Manual Spray Gun Common Single Pipe

    Akwụkwọ ntuziaka ịgbasa egbe nkịtị Single Pipe

    Ịgba égbè ọfiọkde akpaka ime ka ibuga na ịgba mmiri mmiri mkpuchi na ọ na-adịghị mma nrụgide na-emepụta site na mberede mgbasawanye nke abịakọrọ ikuku na ịgba nozulu: ọ na-nkewa n'ime abụọ ụdị: abụọ-ọnọdụ onwe-mmiri kemeghi abụọ-pipe ịgba egbe. , na abụọ ọnọdụ onwe-mmiri adiustable composite-pipe ịgba egbe.

     

    Ọnụọgụ atomization na mpaghara nke egbe ịgba mmiri abụọ nwere ike ịhazigharị, ebe ma gas na-ebupụta ihe atomization quantities nke egbe ịgbasa ọkpọkọ na-agbanwe agbanwe. A na-eji ọnọdụ ikuku gas mee ihe maka ịkwọ ụgbọ ala nke mkpuchi ahụ site na ịfụ na mwepụ nke ihe ndị na-emepụta ihe na-emepụta ihe, ebe a na-eji ihe nkwụsị nke mmiri mmiri mee ihe maka ịgbasa ihe mkpuchi mmiri.

  • Manual Spray Gun Sand Blasting for Cold Chamber High pressure die casting machine

    Akwụkwọ ntuziaka Spray Gun Sand Blasting maka igwe oyi akwa akwa nrụgide anwụ nkedo

    Ụdị ihe eji eme ihe na-eme onwe ya ka ájá na-agbapụta egbe bụ oke okpomọkụ yana nrụgide dị elu nke ihe na-eguzogide ihe mejupụtara.

    Ejikọtara ọnụ, ike siri ike karịa HRC93, njupụta karịrị 2.50g/cm3, aluminom.

    Jiri ọgwụgwọ aluminom alloy na-eguzogide eyi, ike ruo HB110, egbe dum.

    Ndụ ọrụ karịrị 1000 awa; imewe nke oghere nrụgide na-adịghị mma dị mma.

    Ike na ike.

  • Plunger Lubrication Oil

    Mmanụ Plunger mmanu

    Nchekwa: Nchekwa ime ụlọ, ndụ shelf 3 afọ.

    Nkwakọ ngwaahịa: 18Kg Agba Mbukota, 180Kg ígwè mbukota.

    Ụdị: P-LB100, P-LB160.

  • Die Casting Release Agent

    Ndị nnọchi anya mwepụta nkedo

    Ndekọ anụ ahụ na kemịkalụ: enweghị njedebe na mmiri (mmiri soluble), mmiri ara ehi na-acha ọcha (droplet polarized light blue), enweghị ntụpọ ọkụ, uto aromatic, PH8.0-PH9.0, njupụta 0.96-0.97g/ cm3.

12 Ọzọ > >> Peeji nke 1/2